New  Oak and Cedar “Wright” or Far East Style Lighting
These wall lights were suggested by one of our clients. They are very fine and delicate looking but they are very rugged. The gridwork makes them very strong. They are contemporary but still have that Frank Lloyd Wright or Japanese look.

These lights come with our standard wall plate holding them off the wall approximately 3". The lights can be special ordered to be flush mounted. Each of the 3 panels are identical. They can be ordered to have an acrylic cap, that sets down inside, unseen, or our standard wood cap. This would then qualify them for the UL wet label. Other-wise they need to be under an eave or inside. Add $3 for the acrylic and $5 for the wood cap. The S324D wall light has a double socket if more light is required. Long life lamps included.

Wall Light

This wall light was designed for areas where illumination is needed up and down the wall without being able to see the light source.  This fixture illuminates brilliantly with soft attractive light patterns to highlight those special areas that need attention.  Two 5000 hour, 60 watt bulbs are included. 

Dimensions - 10H", 14W", 6"D, Maximum Wattage 2/60

Click for a larger view

Octagon Light

This octagon is perfect for where you want to accent a wall while not passing any light outward.  It will cast light in a V-shaped pattern with more illumination downward than up.  Unit ships complete with a 60 watt long-life bulb.

Mission Light

The wood Mission wall light in its finest tradition using wood to match your Mission design without compromise. Available in landscape and post lighting.  The Mission wood post is 3-1/2" x 3-1/2" clear cedar direct burial.  Available with steel plate for installation on concrete.   The landscape light attaches to 3/4" rigid conduit.  Includes 5,000 hour 75 watt long-life bulb (2-60W in wall light). 

Dimensions
Wall Light 12", 7-1/2" sq.
Post Light and Landscape 18"H, 7-1/2" sq.

Click for
a larger view

Lantern Wall Light

The 252 lantern wall light has a unique traditional look. The 252 Series is also available in a Post Top Style.  Cap is included as part of the design.

Dimensions: 10"H, 7-1/2"W, 9-1/2"D, Max. Wattage 60W

Click for
a larger view

Click for a larger view

Click for a larger view

Click for a larger view

Indirect Sconce

This Powder Coated Steel-Wood light allows light to come out because the center wood covered panel is set back. You can also specify to leave the top and/or bottom open to cause a wall wash effect. It can be painted to your color. The side wood panels are attached to the steel surface. with Stainless Steel bolts.

This fixture may be custom sized to meet your needs. The shown fixture has two 60 watt lamps. Flush Mount

246 Series

The 246 Series wall light is a clean, simple design that gives light in all directions - and is inexpensive. Ideal for hallway applications. Cap not available (damp and interior use only).

Dimensions - 14"H, 6"W, 5"D, Max. Wattage 2/60W

Click for a larger view

R221W
click image to enlarge

R221 Light

Each fixture is shipped complete with an appropriate long life bulb. Finished with Cabots Clear Solution.

Note: All wall lights come with an appropriate 5000 hour long-life bulb.

Wall Light Caps
Damp location leave protection) no cap required. Wet location (direct exposure to elements) cap required. All caps are made from glue-laminated clear material to ensure long-term integrity. Acrylic caps are available. The acrylic cap made for the fixtures on this page is inset on the upper part allowing light to spill upwards and qualifys for wet locations while not being visible. Acrylic cap-$4, Resawn Cedar Cap $4, Smooth Cedar Cap $5

All fixtures are Underwriters Laboratories (UL) listed for their intended application. 

Click Here For Help Using This Site
Contact Idaho Wood (e-mail us) / Order / Order Our Literature